Why ABB 64310810 Remains a Strong Choice for Drive Control Applications

27 Aug, 2026
Posted by: Mehul Vadher

✓ 30-Day Warranty | ✓ Free Shipping

The ABB ACS600 Multidrive Module 64310810 is a high-performance U-phase power module designed for integration within ABB's renowned ACS600 multidrive platform. Manufactured by ABB Oy in Finland, this industrial drive module delivers exceptional motor control capabilities for the most demanding process automation applications. With a robust current rating of 4300A/1156A and a versatile frequency output range spanning 0-300 Hz, the 64310810 module represents a cornerstone component in modern industrial drive systems.

Industrial automation professionals consistently specify ABB ACS600 multidrive modules when reliability and performance cannot be compromised. The ACW6441390600000300900 type designation identifies this unit as a U-phase module (U1.3U), engineered to handle one leg of a three-phase power output within a coordinated multidrive configuration. This modular approach to drive design enables unprecedented flexibility in system architecture, allowing facilities to build customized drive solutions that precisely match their operational requirements.

Aeliya Marine Tech is proud to offer this premium ABB drive module to industrial customers worldwide. Our commitment to quality ensures that every used component we sell has been rigorously evaluated for operational integrity. With our comprehensive 30-day warranty and complimentary shipping, you can integrate this critical drive component into your system with complete operational confidence.

Key Features & Specifications

The ABB ACS600 Multidrive Module 64310810 incorporates a comprehensive array of features that distinguish it as a leading solution in industrial power conversion. Every aspect of its design reflects ABB's commitment to engineering excellence and operational reliability.

Exceptional Current Ratings: Delivers 4300A/1156A output current for powering large industrial motors and complex drive systems
Wide Frequency Output: 0-300 Hz range provides precise speed control for diverse industrial process requirements
U-Phase Module Design: U1.3U configuration serves as the U-phase leg in three-phase multidrive installations
Advanced Control Cards: Features NGDR-03C (Code: 61353364D) and NXPP-03C (Code: 64008544C) for intelligent drive management
Finnish Manufacturing Quality: Produced by ABB Oy in Finland to exacting European engineering standards
Modular Service Architecture: Enables rapid replacement and minimized downtime in multidrive configurations
Rugged Construction: At 59 Kg, the module features heavy-duty industrial-grade components built for longevity

Technical Specifications

Specification	Details
Manufacturer	ABB Oy
Product Series	ACS600 Multidrive Modules
Code	64310810
Type Designation	ACW6441390600000300900 / ACW6345145600000300902
Alternate Code	64277456
Output Voltage (U2)	3~0...U1 V
Rated Current (I2N)	4300A / 1156A
Frequency Range (F2)	0...300 Hz
Phase Configuration	U-Phase Module (U1.3U)
Drive Controller	NGDR-03C (Code: 61353364D)
Processor Card	NXPP-03C (Code: 64008544C)
Country of Origin	Finland
Weight	59 Kg
Condition	Used

Applications & Use Cases

The ABB ACS600 platform, including the 64310810 U-phase module, addresses the motor control requirements of numerous industrial sectors. Its high-current capability and precise frequency control make it an indispensable component in applications where motor performance directly impacts productivity and safety.

Pulp & Paper Industry

Paper manufacturing facilities utilize ACS600 multidrive systems to control the massive motors driving paper machines, winders, and coaters. The precise speed control afforded by the 0-300 Hz frequency range ensures consistent paper quality while the high current capacity accommodates the substantial power requirements of these large machines.

Metals & Mining Operations

Rolling mills, mine hoists, and ore processing equipment demand drive systems capable of delivering high torque at variable speeds. The 64310810 module's 4300A rating provides the power necessary for these heavy-duty applications, while its robust Finnish construction withstands the harsh conditions prevalent in metals processing and mining environments.

Marine Propulsion & Deck Machinery

Commercial vessels and offshore platforms rely on ACS600 drives for main propulsion systems, thrusters, and deck machinery including winches and cranes. The modular architecture allows marine engineers to configure redundant drive systems that maintain operational capability even if individual phase modules require service.

Water & Wastewater Treatment

Large pumps and blowers in municipal water treatment facilities require variable speed operation to optimize energy consumption and process efficiency. The ACS600's ability to precisely control motor speed across a wide frequency range makes it ideal for these critical infrastructure applications.

⚠ Act Fast – Limited Quantity in Stock

The ABB ACS600 Multidrive Module 64310810 is available in limited supply. Secure this U-phase drive module for your multidrive system today.

View Details

Why Choose the ABB ACS600 Multidrive Module 64310810

Industrial drive procurement decisions carry significant implications for operational reliability, maintenance costs, and overall equipment effectiveness. The ABB 64310810 module offers distinct advantages that make it a strategic choice for forward-thinking industrial operations.

Common DC Bus Architecture

The ACS600 multidrive system utilizes a common DC bus configuration that allows energy to flow between connected drives. When one motor decelerates, its regenerated energy can power other motors in the system rather than being wasted as heat. This energy sharing capability delivers significant reductions in overall power consumption, particularly in applications with multiple interconnected motors.

Hot-Swappable Module Design

The modular phase design enables individual modules to be replaced without shutting down the entire drive system. In critical applications where continuous operation is essential, this capability can prevent hours of costly production downtime. Technicians can remove a faulty U-phase module and install a replacement in minutes rather than troubleshooting and repairing the unit on-site.

Comprehensive Protection Systems

Integrated NGDR-03C and NXPP-03C cards provide sophisticated protection against overcurrent, overvoltage, thermal overload, and ground fault conditions. These intelligent protection functions safeguard both the drive module and the connected motor, preventing catastrophic failures that could damage expensive industrial equipment.

Compatibility & Integration

Successful drive module integration requires careful attention to compatibility specifications. The ABB 64310810 module is designed for straightforward integration within ACS600 multidrive installations, with well-defined electrical and mechanical interface requirements.

ACS600 Family Integration

This U-phase module is designed to operate within a complete ACS600 multidrive system, working in concert with ACW6345145600000300902 and ACW6441390600000300900 type modules. The common DC bus interface ensures electrical compatibility across the multidrive lineup, while standardized mechanical dimensions allow modules to be mounted in shared enclosures.

Motor Compatibility

The 4300A/1156A current rating and 0-300 Hz output make this module compatible with a wide range of three-phase AC induction and synchronous motors. System designers should verify that motor voltage, current, and thermal ratings are appropriately matched to the drive module specifications. ABB provides comprehensive drive sizing tools to facilitate proper motor-drive pairing.

Control System Connectivity

The integrated control cards support communication with major industrial automation platforms, enabling seamless integration into existing control architectures. Whether your facility uses ABB's own control systems or third-party PLCs and DCS platforms, the ACS600 module provides the interface flexibility needed for coordinated system operation.

Maintenance & Support

Maximizing the operational lifespan of your ABB drive module requires adherence to recommended maintenance practices and access to knowledgeable technical support.

Preventive Maintenance Recommendations

ABB recommends periodic inspection of power connections for tightness and signs of overheating, verification of cooling system functionality, and cleaning of heat sink surfaces to maintain proper thermal dissipation. The control cards should be inspected for secure seating in their connectors, and parameter settings should be verified against system documentation during scheduled maintenance windows.

Technical Support from Aeliya Marine Tech

Aeliya Marine Tech stands behind every product we sell with expert technical support and a comprehensive 30-day warranty. Our team understands industrial drive technology and can assist with pre-sale compatibility questions as well as post-installation support. We recognize that drive system downtime has serious consequences, and we are committed to helping you maintain operational continuity.

Frequently Asked Questions

Q1: What distinguishes the ABB 64310810 module from other ACS600 modules?

The ABB 64310810 is specifically a U-phase module (U1.3U) within the ACS600 multidrive system. It is distinguished by its U-phase configuration, making it one of three phase modules required to create a complete three-phase output. It is electrically and mechanically designed to work with companion V-phase and W-phase modules in a coordinated multidrive installation.

Q2: What current and voltage ratings does this module support?

The ABB 64310810 module supports an output voltage of 3~0...U1 V with rated current capacity of 4300A/1156A. The frequency output range extends from 0 to 300 Hz, providing extensive speed control flexibility for connected industrial motors.

Q3: Can this module be used as a standalone drive?

The 64310810 is designed as a phase module for integration within the ACS600 multidrive system. While it contains sophisticated control electronics including NGDR-03C and NXPP-03C cards, it is intended for operation within a common DC bus multidrive configuration rather than as a standalone single-drive solution.

Q4: What is the condition and warranty for this product?

This module is offered in used condition and has been thoroughly inspected by Aeliya Marine Tech to verify operational integrity. We provide a 30-day warranty covering functional defects, along with free shipping on all orders. This represents excellent value compared to purchasing new OEM modules.

Q5: Where can I find the manufacturer's technical documentation?

Technical documentation for the ACS600 multidrive series is available from ABB's official website. Aeliya Marine Tech can also provide guidance on accessing the appropriate manuals, wiring diagrams, and parameter configuration guides for the 64310810 module.

Q6: How quickly can this module be shipped?

Aeliya Marine Tech offers free shipping on all orders, including this ABB ACS600 module. Shipping times vary by destination, but we prioritize rapid fulfillment to minimize your downtime. Contact our sales team for specific delivery timelines to your location.